Produced water is industrial waste, which must be managed.
Whether re-injected or discharged back into the ocean, produced water has significant economic and HSE associations. Adoption of a solid’s separation solution improves the quality of produced water management. Remove the risk of erosion on PW pumps.
Whether re-injected or discharged back into the ocean, produced water has significant economic and HSE associations. Adoption of a solid’s separation solution improves the quality of produced water management. Remove the risk of erosion on PW pumps.
Our primary goal is to maintain a clean ocean and remove the need for any dispensations that permits oil to be discharged to sea.
Environmental performance
Solids free water assured
When located upstream of the separator, our separation units deliver a proven separation efficiency of 99.8% over a dynamic range of 20 microns to 10mm solids. By removing solids at this point, carry over is reduced and separation efficiency is increased. This directly improves water quality and alleviates the risk of a solids build-up in the separator, a halt in production and potential erosion of control valves downstream.
Re-establishing separation without shutting-in
When a build-up of solids in the separator takes place, produce water quality decreases. This requires a manual clean out or jetting activity to reverse. Our separation units can deliver on-line jetting to clean out the separator without the need for any additional manual handling activities or HSE risks.
Case Study
Case Studies
October 30 2023
October 30 2023
Ensuring production by removing solids upstream produced water pump
FourPhase is ensuring that no solids enter the produced water reinjection pumps using a cyclonic desander in the Norwegian North Sea
Read More
Overview
Establish solids separation without impacting production
Guarantees solids free water
Improves water quality and alleviates risks of a solids build-up in the separator
Digital planning with 3D Modelling reduces HSE risk
Easily integrates onto crowded deck space
Guarantees solids free water
Improves water quality and alleviates risks of a solids build-up in the separator
Digital planning with 3D Modelling reduces HSE risk
Easily integrates onto crowded deck space
When the DualFlow is positioned upstream of the separator, the quality of the produced water is maintained at all times.
Easily integrates with limited deck space
Designed to integrate easily onto crowded deck space, our units 2×2 metre footprint, is designed to fit within an existing infrastructure. The design facilitates simple hook ups and ties into existing production separators.
Product range
Digital planning for offshore success
Using 3D modelling and visualisation we perform 3D rig ups before mobilisation to ensure seamless integration onto often crowded offshore installations. We incorporate every detail, ahead of mobilisation, to save valuable hours of rig up time and improve HSE.
Data driven