Produced water is industrial waste, which must be managed.
Whether re-injected or discharged back into the ocean, produced water has significant economic and HSE associations. Adoption of a solid’s separation solution improves the quality of produced water management.
Whether re-injected or discharged back into the ocean, produced water has significant economic and HSE associations. Adoption of a solid’s separation solution improves the quality of produced water management.
Our primary goal is to maintain a clean ocean and remove the need for any dispensations that permits oil to be discharged to sea.
Environmental performance
Solids free water assured
When located upstream of the separator, our separation units deliver a proven separation efficiency of 99.8% over a dynamic range of 20 microns to 10mm solids. By removing solids at this point, carry over is reduced and separation efficiency is increased. This directly improves water quality and alleviates the risk of a solids build-up in the separator, a halt in production and potential erosion of control valves downstream.
Re-establishing separation without shutting in
When a build-up of solids in the separator takes place, produce water quality decreases. This requires a manual clean out or jetting activity to reverse. Our separation units can deliver on-line jetting to clean out the separator without the need for any additional manual handling activities or HSE risks.
When the DualFlow is positioned upstream of the separator, the quality of the produced water is maintained at all times. If the DualFlow is placed downstream, the jetting is delivered in line with dispensations.
Deploying the DualFlow as a temporary jetting solution
Maintains production as our two-vessel design ensures the well is never offline
Allows for simple hook-up with a compact skid mounted design
Delivers closed loop operations removing manual handling of solids
Require no capital expenditure outlay all OPEX
Can tie-in to existing production separator inlet and outlet nozzles
Allows for simple hook-up with a compact skid mounted design
Delivers closed loop operations removing manual handling of solids
Require no capital expenditure outlay all OPEX
Can tie-in to existing production separator inlet and outlet nozzles
Easily integrates with limited deck space
Designed to integrate easily onto crowded deck space, our units 2×2 metre footprint, is designed to fit within an existing infrastructure. The design facilitates simple hook ups and ties into existing production separators.
Adaptive technology
Digital planning for offshore success
Using 3D modelling and visualisation we perform 3D rig ups before mobilisation to ensure seamless integration onto often crowded offshore installations. We incorporate every detail, ahead of mobilisation, to save valuable hours of rig up time and improve HSE.
Digital integration
Overview
Establish solids separation without impacting production
Guarantees solids free water
Improves water quality and alleviates risks of a solids build-up in the separator
Digital planning with 3D Modelling reduces HSE risk
Easily integrates onto crowded deck space
Guarantees solids free water
Improves water quality and alleviates risks of a solids build-up in the separator
Digital planning with 3D Modelling reduces HSE risk
Easily integrates onto crowded deck space
